 |
|
1. THE FRAME (WALKO 4 /
WALKO-3)
The base of the workbench is the solid aluminium frame.
The frames can be used in various positions and are easy
to carry around.
Weight WALKO-3 Frame: 15 Kg
Weight WALKO-4 Frame: 19 Kg
SPECIAL:
The ribs of the frame are fitted out with rails on which
accessories can be hooked.
The ribs are also fitted out with replaceable synthetic strips
which can be used to saw through / along.
Both models have a similar working method, with the exception
that the WALKO-3 does not have horizontal rails.
*A
castor set is optional. |
 |
|
2. A SOLID BASE
Disengaging the hinges and placing in the trestle
position.SPECIAL:
Solid as a house and .no chance of running away'. |
 |
|
3. WORK TOPS
Work tops and/or work supports are hooked into the frame at the
desired height. Depending on the type of work that needs doing you
choose the best working height.SPECIAL:
The table supports can be secured. All accessories can be
adjusted in height with a 6,5 centimetre interval.
Changing the height is extremely quick and simple. |
 |
|
4. LARGE WORK SPACE
Large work space with two table-tops in the highest position.
WALKO-3
Compact SET: 75 x 94,5 cm Height : 88,5 cm
WALKO-4 Professional
SET: 107 x 94,5 cm Height : 95,5 cm
SPECIAL:
No metal parts all around the work top and therefore no risk
while sawing materials. Free hanging table-tops; clamps can be
places all around at any position.
Perforated dog hole table tops to position clamps and stoppers. Modern
working height. Extremely stable. |
 |
|
5. UNIQUE CONSTRUCTION TABLE
Use your own favourite glue clamps to fasten a variety of work
pieces in a simple and fast way. Special
quick
cam surface clamps are
available to fasten your work pieces - even in a horizontal
position.*The perforated table tops can handle various
types of clamps and hooks available in the trade. Hole diameter:
20mm.
SPECIAL:
Possibility to uses clamps in and all around the table-tops
Unlimited amount of (clamping) possibilities. WALKO
quick
cam surface clamps are
available for horizontal fastening. (Accessory)
*Certain types of glue clamps have a head which is easily
detachable. These models can also be put right through the holes in
the table-top. |
 |
|
6. ADJUSTABLE WORKING HEIGHT
With the table top in the top position one can work very well at
circle sawing, sanding and milling. Each type of work demands a
different approach. The table tops are easily adjusted to the
required working-height for exact, quick working comfort.
SPECIAL:
Lowering the table top height means drilling from above works much more precisely. Ideal
for working on larger constructions and/or objects (chest, cupboard,
large blocks, etc.) Also easy to use in a sitting position. Decide
the most easy and comfortable working position for yourself. Adjustable
in height in 6,5 cm increments. |
 |
|
7. ADJUSTABLE WORK TOPS
Both the angle and the height of the work tops are adjustable.
Without using clamps a large variety of pieces can be managed.
SPECIAL:
Clamps (usually) not necessary. Ideal for assembling chests and
cupboards. Workspace on both sides. Work pieces are also within reach at
the back side. If necessary: it is possible to clamp onto the frame.
|
 |
|
8. WORK SUPPORTS
The
work-supports are used when the tables stick out too far or when
the work is really heavy. Place the supports at the desired height.
Work objects and tools can either be set on top or hung on the
table.SPECIAL:
Adjustable and foldable. Supports can be left on during
transport. For the heavy work (Max 80 Kg per piece)
*Work-supports are optional. |
 |
|
8a. WORK SUPPORTS
Work supports are also extremely useful when working with larger
materials. You can decide at which height you need
to position your work projects.SPECIAL:
Ideal for drilling, sanding, painting etc. |
 |
|
9. DOOR SUPPORT
The stability of the frame is also very useful when work needs doing
on complete doors. With the aid of a regular glue clamp the door is simply fixed
and made stable to work on.SPECIAL:
Because the door is fixated in the middle there is hardly any
wobbling at all. Regular doors are fixated on the lower horizontal
rib. (See photograph) Small doors are fixated on the higher rib at
the opposite side. |
 |
|
10. SAWING PLATEAU SMALL
Quickly sawing up a couple of pieces to fit? The frame in folded
position can immediately be used as a sawing plateau.
Fast on site: put down the frame and hey presto start the job!
(93,5 x 99,5 cm) SPECIAL:
The ribs are fitted out with replaceable synthetic strips, which
you can simply saw right through. Larger constructions can be
processed on the frame in its open (folded out) position.
*At normal professional usage of the work-bench the spacers
need to be replaced after approximately 1,5 to 2 years. |
 |
|
11. LARGE SAWING PLATEAU OR WALL STAND
The frame can be folded open in order to use it as a large sawing
plateau or as a helping hand against a wall.Loosen the knobs on
the hinges, open up the frame and tighten the knobs again. Easy!
|
 |
|
12. LARGE SAWING PLATEAU
Frame on the floor. Carefree and super fast sawing of sheet
materials.
The frame is very rigid and supplies the ideal surface. The
replaceable synthetic strips which can be sawn right through are 30
mm in height.SPECIAL:
Sheets do not snap on the final piece of the saw edge. One man
on his own can work simply with heavy sheets. Perfect surface to
work on, also for very thin sheet material. Very small to no chance
of damaging the bottom side of the sheets by rubbish on the surface.
If necessary the sheet can be fixed with a clamp.
Putting the frame on other trestles also works just fine, but this
implies lifting the panels on top. |
 |
|
13. THE UNIQUE WALL SUPPORT
What happens when the materials get larger or there is little working-space
at hand? Simply place the WALKO against a wall and discover the huge
advantages of the WALKO method.Doors, window-frames, beams,
rafters, pipes, cupboards, chests, sheet, chairs, no matter what;
the WALKO handles it all.
Work in a fast and carefree manner at the height desired. Working
sitting down, or standing up? No problem!
Keep your materials and tools within easy reach by storing them
on top or underneath the frame.
In the workshop? Place the frame in front of the tool-board and
everything is within easy reach.
SPECIAL:
Simplifies the most diverse and difficult jobs.
Tremendously large working-space in various directions.
Multi-functional.
Takes up very little space. |
 |
|
14. MORE EXAMPLES WALL POSITION
Put the frame against a wall and place the work struts or tables.
1. Painting, sanding, repairing of doors or panels,
2. Sawing, most saw machines fit in between the ribs,
3. Sawing by hand. Clamps not necessary,
4. Assembling large constructions.
Large materials often do not fit on a traditional workbench and
most of the time you are not standing in an upright position. With a WALKO you always work comfortably |
 |
|
15. WALKO SAWING WALL
Sawing can be made easy. Position the sheet material on the supports
and saw along a guide rail or straight edge.
At the position where the actual sawing occurs the work-support
remains folded-up. The sheet is securely supported, but the
circular-saw does not hinder the extended support.
SPECIAL:
Ideal in smaller spaces (hallways, gallery, etc.)
Also very easy for sanding, painting, drilling etc.
If necessary the materials can be clamped onto the frame. |
 |
|
16. WALL MOUNTING SET
With the aid of a
wall
mounting set the frame can be positioned upright
to a wall. The frame can easily be put in a slanting position and/or
taken out. Simply adjust the position of the working-tables and they
can be used.Put the WALKO immediately in front of your tool-board
and enjoy a great work-bench system in a minimal space.
SPECIAL:
This way the WALKO takes up minimum space and can still be used.
Ideal in smaller spaces.
*Work-supports are optional. |
 |
|
MULTIFUNCTIONAL WORKSHOP
The ultimate solution.SPECIAL:
Take a while to think about this.... |
